Articles

About Author:
Manisha Singh
Sagar Institute of Pharmacy & Technology,
Gandhi nagar, Bhopal (M.P.)
manishamasih85@gmail.com

Abstract
Acalypha indica Linn. consists of dried herb of Acalypha indica Linn. belonging to familyEuphorbiaceae. Within the Euphorbiaceae family, Acalypha indica is one of the biggest and most diverse, with nearly 450 species. Two thirds of its species are found in America, 19 of them in Venezuala, they are mainly used as ornamental, but with the rising of traditional medicine, these species are given medical properties painkillers, laxatives, anti-inflammatory and many others.The GC-MS analysis of methanol and acetone (70 : 30) extract prepared from the whole plant of Acalypha indica linn. revealed the presence of different phytochemicals.

About Author:
Ashutosh Gupta
B.Pharm, kanpur university
22ashutoshgupta22@gmail.com

Abstract
This summary represents the Food and Drug Administration’s (FDA’s) current thinking on this topic. It does not create or confer any rights for or on any person and does not operate to bind FDA or the public. You can use an alternative approach if the approach satisfies the requirements of the applicable statutes and regulations. If you want to discuss an alternative approach, contact the FDA staff responsible for implementing this guidance.

About Authors:
*Virendra Sharma, Pooja Sinoriya, Sunil Sharma
Lakshmi Narain Academy of Pharmacy, Gwalior
Kumud23@indiatimes.com

Abstract
To evaluate the anti-inflammatory and analgesic activity of methanolic extract of whole plant of Sida acuta in experimental animal models. Methanolic extract of whole plant of Sida acuta (MESA) (100, 200 and 400 mg/kg p.o.) was studied for its anti-inflammatory activity using Carrageenan induced rat paw edema animal model and analgesic activity at the same dose level using acetic acid induced writhing test and Hot plate analgesia in mice. The methanolic extract of whole plant of Sida acuta (MESA) (100, 200 and 400 mg/kg p.o.). The PI with indomethacin and Sida acuta in carrageenan induced paw edema  at the dose level 400 mg/kg were 60% and 52.5% at the end of 5 hr. In the acetic acid induced writhing test, the extract at the dose level 400 mg/kg showed 83.78% inhibition of writhing. In radiant heat tail- flick method the extract  at the dose 400 mg/kg showed reaction time 4.902 ± 0.545 (p<0.001). The methanolic extract possesses anti-inflammatory and analgesic activity.

About Authors:
S. H. Seyed Mohamed Buhary*, Kamarapu Nagaraju, A. Thanga Thirupathi.
Department of Pharmaceutics, Sankaralingam Bhuvaneswari College of Pharmacy,
Sivakasi, Tamil Nadu, India.
* nagarajukamarapu8@gmail.com

ABSTRACT:
The main goal of this study was to develop a stable formulation of antibiotic drug clarithromycin as an immediate-release tablet. The task of developing immediate release tablet is accomplished by using a suitable diluents and super-disintegrants. Faster disintegration of the tablet administrated orally minimizes absorption time and improves its bioavailability in less time.   The formulation development work was initiated with wet granulation. Microcrystalline cellulose PH 102 were used as diluent. Povidone was used as the binder. Croscarmellose sodium and pre gelatinized starchwas added as a disintegrating agent. Talc and magnesium stearate was used as the lubricant. The prepared granules were compressed into a compression machine.  To evaluate the formulated tablets as per requirements of standards. The tablets thus formulated showed  a satisfactory physical parameters, and it was found to be stable.Evalution Parameters Like weight variation, hardness of the tablet, friability, thickness, disintegration test, drug content uniformity and in vitro release studies were performed.To optimize the trial batch by    3² full factorial design study and determined  the best batch by in vitro release studies are showed that  optimization formulation (OF7) was 101.62% respectively. The  optimized formulation is further selected and compared with the release profile of the innovator product. The results suggest the feasibility of developing immediate  tablets consisting of clarithromycin for the convenience of patients with respiratory infections, gonorrhea, community-acquired pneumonia, pelvic inflammatory disease, pediatric otitis media and pharyngitis and Mycobacterium avium complex (MAC) in patients with advanced HIV disease.

[adsense:336x280:8701650588]

About Authors:
Saritha. A. Surendran*, Prof.O.G. Vinaya, Santhosh. R. Iyer, Anisha. N.A
Calicut University, College Of Pharmaceutical Sciences,
Govt. Medical College, Calicut,
Kerala, India
*sarithaasurendran@gmail.com

ABSTRACT
The Goal of the present investigation was to design and evaluate gels for topical delivery of water insoluble antifungal agent, Clotrimazole with an aim to increase its penetration through skin. Clotrimazole is a broad spectrum imidazole derivative useful in the treatment of superficial fungal infections. Purpose was to improve the solubility, invitro characteristics and dissolution properties of Clotrimazole by the preparation of its solid dispersion with beta cyclodextrin using kneading method by using different drug carrier ratios. Prepared solid dispersion was evaluated for percent practical yield, drug content uniformity, in vitro dissolution rate, DSC and IR studies. Solid dispersions was optimized based on the release characteristics, and were incorporated into gels. Faster dissolution was exhibited by solid dispersion containing l: l ratio of drug: β-cyclodextrin by kneading method. Gels have gained more importance because the gel-bases formulations are better percutaneously absorbed than creams and ointment bases. The gels were formulated by using Carbopol 940, HPMC, and Methyl cellulose and evaluated for pH, drug content, spreadability, extrudability, viscosity determination and diffusion study. Invitro drug release of clotrimazole solid dispersion incorporated gels was showed that Carbopol gels was showed higher drug release as compared to HPMC, methyl cellulose gels.  Optimized gel was then undergone skin irritation test, stability studies, and invitro antifungal test. In conclusion, the optimized gel showed good physicochemical properties, better drug release, and reasonable stability

About Authors:
Jeevan Sharma¹*, Davidson Rajesh^2
1B.Pharmacy, JSS college of pharmacy Ooty
²Regional manager, Natco Pharma litmited, Chennai
*jeevan.pharma@yahoo.com

ABSTRACTS:
Attrition refers to the reduction in staff and employees in a company through normal means, such as retirement and resignation. The primary focus of this  article is to present the high rate of attrition seen in the pharmaceutical marketing  industry , its causes and controlling strategy for  retentions of pharma sales representatives. Though  attrition is a natural phenomena in all industries  , Indian Pharma marketing industries is worst plagued by It. After IT and BPO , pharma  marketing industries experience  the greatest rate of employee leaving the company for various reasons. While   global pharma  marketing attrition rate  is  10-12%  per annum, the rate of employees who leave  the organization in India is 25 -30 %.  The attrition is more prevalent in the middle and junior management level.

About Authors:
Y. Kranthi Kumar*, Y.Prathyuha
Department of Pharmaceutical Analysis,
Venkateshwara Institute of Pharmaceutical sciences
Cheralapally, Nalgonda- 508001
*kk16052@gmail.com

Introduction
The present work deals with the studies carried out on the development and validation of RP-HPLC for the Lamivudine. Now a days the solutions have gained a lot of importance due to greater patient acceptability, increased potency, multiple action, fewer side effects and quicker relief.

About Author:
Sachin Kaushik
P.G. Department of Pharmacology,
B.L.D.E.A.’s college of Pharmacy,
Bijapur- 586103, Karnataka,India.
sachin_2004_kaushik@yahoo.com

ABSTRACT
In this general overview, we discussed about stress, types of stress, mechanism and its management. According to the report of WHO, approximately 450 million people suffer from mental or behavioral disorders like stress. This amounts to 12.3% of the global burden of disease and predicted to rise up to 15% by 2020. Therefore there is a need of an effective management to control stress and stress induced disorders.